How to create a fully redundant tps
This procedure was used to set up two cloned TPS instances behind a software load balancer. The TPS instances are connected to cloned pairs of CA, DRM and TKS instances, which are configured on the TPS in failover lists.
With this setup, enrolment requests are processed on both TPS instances in a round robin fashion. When one TPS is shut down, the other handles all requests seamlessly. In addition, if any one of the CA,DRM or TKS clone pairs goes down, enrolments still succeed through the other clone. Thus, the system is load balanced and highly available.
- host1: ca, kra, tks, tps1, ds (with internal db for ca, kra, tks, tps1, auth db)
- host2: ca2 (clone of ca), kra2 (clone of kra), tks2 (clone of tks), tps2 (manually cloned), ds (with internal db for ca2, kra2, tks2, tps2)
- host3: load balancer
- Create the directory server instances on host1, host2. So that the console could be used to create the replication agreements, I used setup-admin-ds.pl (with both instances being registered to the same admin server).
- On host1, install and configure ca, kra, tks, tps1. For the auth db, I chose to use a suffix on host1's ds instance. In practice, this is likely to be a separate instance altogether.
- On host2, install and configure ca2, kra2, tks2. These are clones of their corresponding instances on host1 using the ds instance on host2 to store their internal db.
- On host2, install and configure tps2. I chose the instance and suffix on host1's ds instance for the auth db, and to the ds on host2 for the internal db. Point to the ca, drm and tks on host2.
- Set up the replication agreement between tps1 and tps2's internal database. To do this, you need to do the following in the ds console (while logged in ad directory manager)
- On the host2 ds instance, create a new suffix with the same value as the tps on host1. By default, this will be dc="hostname of host1"-"tps instance name" -- i.e. something like dc=host1-pki-tps.
- On both host1 and host2, create a replication user with password. I used uid=rmanager,cn=config. The user needs to be outside the suffix you are trying to replicate.
- Enable changelog on the tps internal db suffix on both host1 and host2 instances. Give them different replicaIDs.
- Create replication multi-master agreements from tps1 to tps2, and from tps2 to tps1. Initialize the consumer in both cases.
- Modify the CS.cfg for tps2 to point to the new basedn. Look for all instances of "hostname of host2"-"instance name" (by default) and replace with "hostname of host1"-"instance name". As of now, the following are attributes that have to be changed:
- Note: When a TPS is newly created, the only thing in the database is the entry of the admin user. So once you switch to the new baseDN, you will no longer be able to use tps2's admin user to log into tps2. You will,however, be able to use tps1's admin user instead. And you can always create more users.
- Modify the CS.cfg for the tps on both instances to include the hostand port for both ca and clone, kra and clone, tks and clone. The expected format is host1:port host2:port (separated by a single space). This is a fail-over list. This means that the first entry will always be contacted first, and if that fails, the second entry and so on. So, to keep activity on the subsystems balanced, you might want to configure tps1 to have host1:port host2:port, and tps2 to have host2:port host1:port. The parameters affected are:
- On both tps, the following files need to be edited to point to the load balancer instead of either host1 or host2. These are the html files displayed in the phone home URL and on the security officer workstation.
- On both TPS, the following parameters should be changed to point to the load balancer instead of host1 or host2 in CS.cfg. These are the phone home URLs burned on the card. They are of the format op.<operation>.<profile>.issuerinfo.value.
- etc ..
- Restart the tps instances.
- To do load balancing, I used the following simple load-balancing software on a separate load balancer box:balancer You basically unzip the software and run as follows. This will round robin balance requests to local port 7888 and 7889 to host1 and host2
./balance 7888 host1 host2 ./balance 7889 host1 host2
With this setup, I tested the following operations:
- enrolments (with real tokens and tpsclient)
- renewals (with real tokens)
- key changeover. I generated a new key on one tks and used the documented procedure to transport the key to the other tks, and reconfigure the tps instances. See tkstool for details.
Note: When a TPS is newly created, the only thing in the database is the entry of the admin user. So once you switch to the new baseDN, you will no longer be able to use tps2's admin user to log into tps2. You will,however, be able to use tps1's admin user instead. And you can always create more users.
Note: When I originally set this up, I created tps2 before I created the cloned instances ca2, kra2, tks2, because I just want to test high availability of TPS behind a load balancer. I then ran into the following schema replication issue. If you follow the procedure above, you will not run into this issue. When replication occurs, the schema is also replicated. The problem is that the schema on host2 instance is "newer" and so it will overwrite the schema on host1. But host2 only contains the schema for tps - and not for the other instances. This means that the schema for the ca, kra, tks on host1's ds instance will be lost. To ensure this does not happen - you can always choose to use separatedb instances for your tps instances. In practice, that is what is likely to be the configuration in any case. But, you can also easily fix this by re-importing the ca, kra and tks schema using ldapmodify on host1. ldapmodify -h localhost -p 7389 -D "cn=directory manager" -w redhat123 -f /usr/share/pki/ca/conf/schema.ldif (and so on for kra etc.)
Note: The drm transport certificate is usually updated on the tks during tps installation. Because I had originally set up tps2 before I set up tks2, this step was not performed. So, I needed to add the DRM transport cert to the tks2 security database and set it accordingly in CS.cfg. This step is not neccessary if you follow the procedure above. 1. On the tks, modify the following parameter in CS.cfg to be the same as on tks1: tks.drm_transport_cert_nickname 2. Stop the tks and add the DRM transport cert to the security database. [root@dell-pe830-02 ~]# service pki-tks stop Stopping pki-tks: ...............................[ OK ] [root@dell-pe830-02 ~]# certutil -A -d /var/lib/pki-tks/alias/ -n "DRM Transport Certificate - RhtsEngBosRedhat Domain tps clonetest domain" -t "c,c,c" -a -i transport.txt
Note: The CA has configuration information in CS.cfg for a CA-DRM connector. This is how the CA communicates to the DRM. Currently, there is no way to configure the CA-DRM connector to use a failover list. However, if the DRM and its clone are behind a load balancer - and the connector is provided with load balancer address, then the connector will fail over with no problems.